XIRI Facility SolutionsESD-Safe Floor Care, Conductive Waxing & ANSI/ESD S20.20 Resistance Testing in Williston Park
Electrostatic discharge prevention for electronics assembly, aerospace, defense, medical device labs, and data centers in Nassau, Suffolk & Queens. Calibrated megohmmeter testing (10⁵–10⁹ Ω), ACL Staticide finishes, and documented compliance.

Dental Practice & Operatories
Terminal Cleaning & Operatory Disinfection
Serving Williston Park (11596)
XIRI provides esd-safe floor care (ansi/esd s20.20) services for facilities in Williston Park, NY and the surrounding Nassau County area. Williston Park, located in Nassau County, is a vibrant village with a population of over 7,300 residents. As an incorporated village in the Town of North Hempstead, Williston Park presents a mix of commercial and community activity.
Why One Wrong Floor Wax Visit Destroys Your ESD Protection
In electronics manufacturing, aerospace/defense assembly (along the Route 110 Melville and Hauppauge Industrial Park corridors), semiconductor labs, and hospital imaging suites, your conductive or static-dissipative VCT, epoxy, or rubber floor is your primary ground path. If a standard janitorial crew applies regular commercial floor wax or cleans with an insulating surfactant, they create a dielectric barrier over your conductive tiles — spiking surface resistance above 10⁹ ohms and exposing sensitive PCBs, avionics, and medical devices to catastrophic latent ESD failures.
Our ANSI/ESD S20.20 & STM7.1 Certified Floor Protocol
XIRI treats ESD floor maintenance as a calibrated engineering procedure. When stripping failed or insulating wax from ESD vinyl or epoxy, we use non-ammoniated, ESD-approved strippers and low-RPM pads that never abrade embedded carbon veins or copper grounding strips. We apply 2–3 thin, cross-linked coats of certified static-dissipative finish (such as ACL Staticide Ultra II or Statguard) and perform pre- and post-service 5-pound electrode megohmmeter testing per ANSI/ESD STM7.1. Your Quality & Compliance Director receives a signed resistance log (Rtt and Rtg in ohms, temperature, and relative humidity) after every visit.
Technical & Compliance Checklist
Point-to-Point (Rtt) & Point-to-Ground (Rtg) megohmmeter testing before and after service (10⁵ to 10⁹ ohms)
ANSI/ESD STM7.1-2020
Application of certified static-dissipative floor finish (ACL Staticide / Statguard) — zero insulating acrylic wax
ANSI/ESD S20.20-2021
Neutral-pH ESD cleaner maintenance that preserves conductive carbon/copper grounding grids
ESD TR20.20
ESD heel-strap & footwear system resistance verification for all floor technicians
ANSI/ESD STM97.1
Copper grounding strip continuity & adhesive residue inspection prior to recoat
IPC / Defense Standard
Related Services in Williston Park
Trusted at UBS Arena for Georgia-Pacific's IoT Soap Dispensing Hardware Deployment
When Georgia-Pacific needed field execution for connected, smart soap dispensing hardware at UBS Arena, XIRI delivered. We bring that exact same technical precision, hygiene accountability, and supply-chain reliability to private dental practices, medical suites, and commercial facilities across Long Island & Queens.
Frequently Asked Questions
Do you test and log floor conductivity in ohms after stripping and waxing?
Yes. Using a calibrated megohmmeter and dual 5-lb cylindrical electrodes per ANSI/ESD STM7.1, we measure Point-to-Point (Rtt) and Point-to-Ground (Rtg) resistance across multiple grid points before and after service to certify your floor remains within the 1.0 × 10⁵ to 1.0 × 10⁹ ohm specification.
Can you fix an ESD floor that a previous cleaner ruined with regular commercial floor wax?
Yes. This is one of our most common emergency requests. We perform a controlled chemical strip to remove the insulating acrylic wax layers down to the bare conductive vinyl or epoxy tile, test the underlying copper ground path, and restore conductivity with an ANSI/ESD S20.20-compliant dissipative polymer finish.
What ESD floor finishes and daily cleaners do you use?
We use industry-standard static-dissipative finishes (including ACL Staticide and Statguard) and zero-residue neutral ESD daily cleaners — never oil-based dust mops, silicone sprays, or standard Mop & Glo products.
Need ESD-Safe Floor Care (ANSI/ESD S20.20) in Williston Park?
Book a free site audit in Williston Park. We'll assess your facility and build a compliance-ready protocol.
Direct Project Desk: (516) 399-0350Get Your ESD-Safe Floor Care (ANSI/ESD S20.20) - Williston Park Scope
See what you should be paying. Enter your details to get a data-backed cleaning quote in under 2 minutes.
Text your facility type & town — our operations desk replies in minutes.